Green Shadow & Black Shadow Hone Set - 150mm x 40mm (6 x 1.5") - French Fine Razor Hones Sharpening Stones with Slurry Stone

This set of Green Shadow & Black Shadow hones is an affordable and versatile set of fine French hones to add to your honing regimen. The Green Shadow is a slightly softer (but still hard) slate with more tactile feedback on steel when honing while the Black Shadow is harder and offers the ultimate finish while still retaining a velvety feedback (not too glassy feeling).
Both would make excellent finishers for refreshing a tired edge or a powerful finishing pair when used after a coticule, 5-8k synthetic hone, etc. in a honing progression.

The Green Shadow & Black Shadow hones are both a slate type stone They both come from a private family land in France composed in particular of slate of different grains allowing the harvesting of the entire Shadow range.

Grit:
Black Shadow - Grain of 8000-10000 grit, dense and hard stone for finishing razors, knives or other tools (gouges, wood chisels)

Black Shadow - Grain of 12000-15000 grit, very dense and hard stone for finishing razors, knives or other tools (gouges, wood chisels)

Directions for use:
Both hones can be used with slurry produced with a piece of the same stone (included), the slurry is best with little water on the stone, too much water will make it slip the end with a suction cup effect (hard stone), a minimum of water is recommended in order to use it perfectly and optimally. A slurry-honed edge will have a hazy finish while the slurry gives faster and more powerful sharpening.

The water-based finish will allow a shiny polishing, the use of Glycerin/oil will allow a more homogeneous finish, it is possible to switch from oil to water-based use provided the stone is well cleaned.

Stone finish: The 20mm thick stones are ready to use and surfaced with 80/120/240/600/1000 diamond discs and finished on felt + Alumina oxide